Product Descriptions
- Standard colors are shown. Other colors are available.
- Letters are embedded in a crystal-clear epoxy.

EPL001 – Left, EPR001 – Right
EPP001 – Pair. Size: 1-1/8″ x 1-3/8″ 1/8″.

EPL101 – Left, EPR101 – Right
EPP101 – Pair. Size: 1-1/4″ Diameter x 1/8″.

EPL003 – Left, EPR003 – Right
EPP003 – Pair. Size: 7/8″ x 1-5/8″ x 1/8″*.

EPL103 – Left, EPR103 – Right
EPP103 – Pair. Size: 1-1/4″ Diameter x 1/8″.

EPL006 – Left, EPR006 – Right
EPP006 – Pair. Size: 1-5/8″ x 7/8″ x 1/8″.

EPM001 – Mixed Pair
EPM003 – Mixed Pair with 1-3 Initials.
*The EPL003, EPR003, and EPP003 are available without color at a lower cost. Just add “-WH” to the end of these catalog numbers.

EPL021 – Left, EPR021 – Right
EPP021 – Pair. Size: 2-1/2″ x 7/8″ x 1-1/8″.

EPL032 – Left, EPR032 – Right
EPP032 – Pair with 1-3 Initials. Size: 2-1/2″ x 7/8″ x 1-1/8″.

EPL011 – Left, EPR011 – Right
EPP011 – Pair. Size: 1-1/4″ x 2″ x 1/8″.

EPL013 – Left, EPR013 – Right
EPP013 – Pair with 1-3 Initials. Size: 1-1/4″ x 2″ x 1/8″.

EPL016 – Left, EPR016 – Right
EPP016 – Pair with 1-3 Initials. Size: 2″ x 1-1/4″ x 1/8″.
- Standard colors are shown. Other colors are available.
- Letters are embedded in a crystal-clear epoxy.
- The background of durable aluminum adds density and improves the image.

EAL001 (Left), EAR001 (Right)
EAP001 (Pair), Size: 3/4″ x 1-1/8″ x 7/64″.

EAL011 (Left), EAR011 (Right)
EAP011 (Pair) Size: 3/4″ x 1-3/8″ x 7/64″.

EAL003 1-3 Initials (Left), EAR003 1-3 Initials (Right)
EAP003 1-3 Initials (Pair), Size: 3/4″ x 1-1/2″ x 7/64″.

EAL013 1-3 Initials (Left), EAR013 1-3 Initials (Right)
EAP013 1-3 Initials (Pair), Size: 3/4″ x 1-7/8″ x 7/64″.

EAL021 (Left). Size: 1-7/8″ x 3/4″ x 7/64″.

EAR021 (Right), Size: 2-1/8″ x 3/4″ x 7/64″, EAP021 (Pair).

EAL041 (Left), EAR041 (Right), EAP041 (Pair)
EAL043 – 1-3 Initials (Left) EAR043 – 1-3 Initials (Right)
EAP043 – 1-3 Initials (Pair) EAA001 – Arrow Only
Size: 2-1/4″ x 3/4″ x 7/64″.

EAL032 – 1-3 Initials (Left), EAR032 – 1-3 Initials (Right)
EAP032 – 1-3 Initials (Pair), Size: 2-1/2″ x 3/4″ x 7/64″.
All markers on this page contain a copper filter in one half of a double marker or in two markers of a four marker set. This allows the technician to mark the films at varying x-ray exposures or subject densities without changing the markers.
ALUMINUM
Sizes: All vertical – 3/4″ x 1-1/2″ x 7/64″, All horizontal – 2″ x 3/4″ x 7/64″.

Copper Filtered/Unfiltered Left and Right Markers
EAC001 – Set of 4, Filtered and Unfiltered

Copper Filtered/Unfiltered Left and Right Markers
EAC003 – Set of 4, Filtered and Unfiltered, 1-3 Initials

Combination Copper Filter Left and Right Markers
EACL51 – Left Marker, Filtered and Unfiltered
EACR51 – Right Marker, Filtered and Unfiltered
EACP51 – Pair, Filtered and Unfiltered

Combination Copper Filter Left and Right Markers
EACL53 – Left Marker, Filtered and Unfiltered, 1-3 Initials
EACR53 – Right Marker, Filtered and Unfiltered, 1-3 Initials
EACP53 – Pair, Filtered and Unfiltered, 1-3 Initials
MOLDED PLASTIC

Copper Filtered/Unfiltered Left and Right Markers
EPC001 – Set of 4, Filtered and Unfiltered

Copper Filtered/Unfiltered Left and Right Markers
EPC003 – Set of 4, Filtered and Unfiltered, 1-3 Initials

Combination Copper Filter Left and Right Markers
EPCL51 – Left Marker, Filtered and Unfiltered
EPCR51 – Right Marker, Filtered and Unfiltered
EPCP51 – Pair, Filtered and Unfiltered

Combination Copper Filter Left and Right Markers
EPCL53 – Left Marker, Filtered and Unfiltered, 1-3 Initials
EPCR53 – Right Marker, Filtered and Unfiltered, 1-3 Initials
EPCP53 – Pair, Filtered and Unfiltered, 1-3 Initials
Position Markers indicate laterality (Left or Right) and the inclination of the patient. Small lead balls inside these markers indicate whether the patient is horizontal or shows direction of inclination. You can purchase them with or without initials and with aluminum or molded plastic backing.

Plastic Position Indicator Markers without Initials
PPL01-V (Left), PPR01-V (Right), PPP01-V (Pair)
Size: 1-1/8″ x 13/8″ x 1-5/64″.

Plastic Position Indicator Markers with 1-3 Initials, Horizontal
PPL03-H (Left), PPR03-H (Right), PPP03-H (Pair)
Size: 2″ x 1-1/4″ x 1-5/64″.

Plastic Position Indicator Markers with 1-3 Initials, Horizontal
PPL03-H (Left), PPR03-H (Right), PPP03-H (Pair)
Size: 2″ x 1-1/4″ x 1-5/64″.

Aluminum Position Indicator Markers without Initials, Vertical
PAL01-V (Left), PAR01-V (Right), PAP01-V (Pair)
Size: 3/4″ x 2-1/4″ x 1-3/64″.

Aluminum Position Indicator Markers with 1-3 Initials, Vertical
PAL03-V (Left), PAR03-V (Right), PAP03-V (Pair)
Size: 3/4″ x 2-1/4″ x 1-3/64″.

Aluminum Position Indicator Markers without Initials, Horizontal
PAL01-H (Left), PAR01-H (Right), PAP01-H (Pair)
Size: 2″ x 3/4″ x 1-3/64″.

Aluminum Position Indicator Markers with 1-3 Initials, Horizontal
PAL03-H (Left), PAR03-H (Right), PAP03-H (Pair)
Size: 2″ x 3/4″ x 1-3/64″.
- Solid lead letters are embedded in a crystal clear plastic.
- The background rather than the embedding plastic is colored. This enhances contrast.
- Standard background color is red.
- The aluminum adds to image density while the snow-white polycarbonate plastic is exceptionally tough and highly visible.
ALUMINUM

3/8″ Marker, Size: 3/4″ high x 1/8″ thick.

1/2″ Marker, Size: 3/4″ high x 1/8″ thick.

MOLDED PLASTIC

3/8″ Marker, Size: 7/8″ high x 1/8″ thick.

1/2″ Marker, Size: 7/8″ high x 1/8″ thick.

- In addition to custom sets, you may purchase Embedded Markers as a standard set containing commonly used legends.
- Each set comes with a very durable,attractive 14″ x 14″ Formica hook board with 50 markers (as pictured, including and extra “0” and “1”), 50 assembled hooks, and four mounting screws with anchors.
- Optional engraved nameplates to identify the hospital or department can also be ordered.

EAS050 – 3/8″ Aluminum Set.

EAS150 – 1/2″ Aluminum Set.

EPS050 – 3/8″ Plastic Set, (14″ x 14″) 50 Markers.
IVP EMBEDDED SETS

EAS252 – 3/8″ Aluminum Set, (14″ x 14″) 52 Markers.

EPS252 – 3/8″ Plastic Set, (14″ x 14″) 52 Markers.
EMBEDDED TOMOGRAPHY SETS

EAS332 – 3/8″ Aluminum Set, (9″ x 8-1/4″) 30 Markers.

EPS332 – 3/8″ Plastic Set, (9″ x 8-1/4″) 30 Markers.
CUSTOM ENCLOSED MARKER

1/2″ marker at actual size.
- The Enclosed Marker is made of durable aluminum with dense lead letters, permanently enclosed between the aluminum background and a tough, clear plastic covering.
- You can create your own custom wording in the following letter heights to fit your exact needs: 1/8″, 3/16″, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 1″.
- Any combination of letter sizes may be used to differentiate data
such as patient positions from technicians’ initials. - Flat Face style letters are standard. Optional copper filters are available in .006″, .016″, and .032″ thickness.

Be sure to check for the option of purchasing the Enclosed Markers or other markers as standard sets.

Add “-C” to the end of a number for markers with a copper filter added.
CUSTOM ENCLOSED MARKER SETS
- In addition to custom markers, you may purchase our money-saving Enclosed Marker Sets which contain most of the commonly used legends.
- The set comes with a very durable, attractive, 14″ x 14″ Formica™ hook board with 50 markers (as pictured, including an extra “0” and “1”), 50 assembled hooks, and four mounting screws with anchors.
- The standard finish is maple/butcher-block style with dark stained beveled edges.
- Optional engraved nameplates to identify the hospital or department can also be ordered.
- Enclosed Marker Sets are available in either 1/4″, 1/2″, or 5/8″ high legends.

We can furnish you with a storage board that will match your storage needs. The selection includes a variety of hook boards, a board for suction cup markers, and a board for markers with Marker-Foot™ tape. Our tough Maple Formica™ boards resist scratching while retaining the beauty of wood. On most boards you can identify departments by adding optional nameplates or engraved names. Storage boards on this page do not include pictured markers.

Formica™ Hook Board (14″ x 14″)
Assembled 50 Hook – FHB150, Unassembled 50 Hook – FHB050*, Optional Engraved Nameplate – NFH050

Formica™ Hook Board (11″ x 11-1/4″)
32 Hooks – FHB032

Formica™ Hook Board (4-1/4″ x 10-3/16″)
8 Hook – FHB008, 16 Hook – FHB016, 17 Hook – MMB002
20 Hook – MMB003, Engraved Nameplate – NFH020

Storage Board for Markers with Marker Foot™ Tape
(4-1/4″ x 10-3/16″ x 1/8″)
With Engraved Name – NMF001
Without Engraved Name – NMF002

Storage Board for Suction Cup Markers (4″ x 10″)
MMB001

Economy Marker Board (Marlite™) (8″ x 12″)
16 Hook – HBM016*, 20 Hook – HBM020*
Formica is a registered trademark of the American Cyanamid Company and trademark of the Masonite Corporation. Marker Foot is a registered trademark of Revelation Medical.
* Requires assembly. All other boards are assembled.
Please specify 48 hook boards (FHB048* or FHB148) for 5/8″ Enclosed Marker sets.
- These are our highest-quality markers.
- Bright white letters and a contrasting matte color background make the legends easy to read.
- The solid, thick letters make these legends very legible on x-ray film.
- The precision computergenerated placement of each letter makes these markers look more professional.

FCL001, FCR001 – Size: 1-5/16″ x 5/8″ x 9/64″

FCL004 , FCR004- Size: 1-5/16″ x 5/8″ x 9/64″

FCL002-V, FCR002-V Size: 9/16″ x 1-1/2″ x 9/64″.

FCL011, FCR011 – Size: 2-1/8″ x 5/8″ x 9/64″.

FCL014, FCR014 – Size: 2-5/8″ x 5/8″ x 9/64″.
NOTE: Substitute “P” for “L” or “R” when ordering pairs. For example, “FCP004” is a set of L and R markers with a hole and three initials.

These markers are backed with vinyl plastic. If you desire aluminum or copper filters, just add “-A” or “-C” to the end of our catalog number. Add “-V” if you desire vertical formatting of the letters.
*We apply Marker Foot™ Tape to the back of these markers. This tape allows the marker to be adhered repeatedly to different locations on the x-ray table or film cassette. Replacement tape is available (Cat. No. LAMF001).
Mark-Clear Left and Right Duo Markers
- Mark-Clear Markers with twin legends.
- The yellow legends have copper filters embedded beneath them to allow technicians to make different x-ray exposures without relocating markers.

DML003, DMR003 – Size: 2″ x 5/8″ x 9/64″.

DML004, DMR004 – Size: 2″ x 1″ x 9/64″.
The Mark-Clear Marker comes with custom wording. The bright white (lead) letters, matte colored acrylic, and computer-generated letters, make a beautiful, readable marker. Just specify words desired. This marker uses 1/4″ high letters. Dark blue is the standard color, although other colors are available.



Replacement Marker Foot™ Tape is available in rolls (Catalog Number LAMF001). One roll supplies enough tape for 100 markers.
Add “-C” or “-A” to the end of catalog numbers if you desire markers with copper or aluminum.
- Use these markers to conveniently indicate Left and Right views.
- Order mixed sets (one round/one square) to quickly identify correct marker by feel.
- Identify technologists, departments, etc. with custom engraved letters or numbers.
- Markers are also available with “D” and “G” to indicate “Right” and “Left” in French.
- Manufactured in polycarbonate plastic which is virtually unbreakable and resistant to alcohol which may be used to sterilize the marker.

ASL003, ASR003 – Size: 1-3/16″ x 13/32″ x 1/8″.

ARL002, ARR002 Size: 1-3/32″ Diameter x 1/8″.

This marker encases a white 1/4″ thick lead letter in a thick acrylic plastic. • These thicker markers are used when procedures require high kVp exposures.

Each Size: 1-1/4″ x 2 1/4″ x 9/32″.

Size: 2-3/8″ x 1″ x 9/32″.


These lead characters come in a wide selection of styles and sizes so you can easily match what you are presently using. Just send us a sample, and we will return it with your order.
Our letters are manufactured by a process which eliminates large interior voids found in die-cast letters, so that your x-ray legends will be clear and distinct. Since they are manufactured with flat backs, they can be easily and firmly mounted on any flat surface.
Flat Face is the standard style, although Condensed Deep Block is also a popular style because of its improved legibility on x-ray film. 1/4″ thick Industrial is used in high kVp applications. Lead arrows are also available in 1/4″, 1/2″, 5/8″, 1″, 1-1/4″, and 1-1/2″ lengths.
Just specify the letter style, height (or arrow length), and quantity for each letter, number, or arrow. We will indicate the correct catalog number on your invoice. For your reference, the catalog number for each style, size, and
mounting is listed on our price sheet. If you do not see a style that you need, please contact us. We either have it or can manufacture it.
Your local x-ray dealer, working with our efficient, friendly, and knowledgeable staff, makes ordering these letters a pleasure.

We custom-mount individual lead characters or complete words on plastic, aluminum, or copper to your specifications. We use flat-back letters and a special adhesive to insure that the letters stay permanently on their backing.
You will find mounted letters easier to handle, more economical than markers, and custom-made to fit your standard channel markers. You may also find that Aluminum or Copper mountings improve the letter contrast on your radiograph.

To order mounted individual characters or words, please indicate:
Letter Size – See previous page for the available sizes of all our letter styles.
Letter Style – See previous page for available letter styles. Unless you specify otherwise, we will mount the Flat Face Style.
Mounting Sizes, Individual Characters – The above are actual-size photographs of our standard mountings. Match your sample to these pictures, and reference the mounting number in your order. If your sample does not match, send us the sample, and we will return it with your order. You may also send sketches with exact dimensions or indicate the name of the channel marker you are using.
Mounting Sizes, Words – You can also use the above pictures and table to order standard mounted words. If your sample does not match any of the above pictures, send a sample, description, or sketch indicating letter style and height. Include the height and width of mounting background, and position of words, if not centered. Unless you indicate otherwise, words of greatest height will be mounted with an equal top and bottom margin; words of lesser height will rest on baseline of those taller words.
Mounting Material – All mountings will be centered on .020″ thick white vinyl plastic, unless your sample, drawing or specified holder indicates otherwise. Industrial style letters will be mounted on black plastic, unless otherwise specified.
Accuracy – Please double-check your order specifications. We will not accept returns for mounted letters or words unless it is due to our error.
We can mount letters on the following materials:
Black Plastic (.030″ or .040″ thick)
Clear Plastic (.020″ or .030″ thick), mounted on the front (standard) or back Aluminum (.016″ thick)
Copper (.006, .016″, .032″ thick)
Note: Because of the large number of variations in mountings and letter styles, we have many catalog numbers for these options. We suggest you give your dealer a product description similar to the examples under “Specifying Quantity” above. We will indicate the correct catalog number and your dealer’s catalog number on our invoice and packing slip. Our catalog numbers can be located on our current price sheet.


Acrylic Scales
These special scales are used when the radiologist needs to indicate locations or measurements in the imaging field. We engrave deep, 0.5 cm. graduations into tough acrylic plastic and fill them with a special radiopaque compound to leave distinct images on the radiograph. These scales have a center line for topographic recordings. They are available in both the 45 cm. and 115 cm. lengths with a hanging hole for storage.


Flexible Scales

This radiopaque extremity ruler is manufactured from a high performance, chemical-resistant plastic which can be sterilized using ethylene oxide or alcohol. Unlike acrylic rulers, this ruler is very flexible and virtually unbreakable.
These scales are used whenever measurements or locations in the image field are required. 1 cm. and 0.5 cm. graduations are engraved at least 0.030″ deep and filled with a special, flexible radiopaque material to give distinct and permanent readings on the radiograph. 115 cm. lengths are available in two thicknesses (1/16″ and 1/8″), and we also manufacture 45 cm. flexible scales (1/16″ thick).



Mark-Fast Markers
You can use this set to make any standard positioning views indicated in the ACR technologist’s manual.
You can use this set to make any standard positioning views indicated in the ACR technologist’s manual.
BOTH STYLES
- All legends are specified by the American College of Radiology.
- Solid lead letters embedded in laminated acrylic which is color-coded to aid in proper sequential placement. (Colors: R-Red, L-Blue, M-Tan, RM/RL-Celadon Green, Other Legends-Gray)
- White letters and matte faces enhance readability.
- Available with plastic (standard) or aluminum backing.
- Custom legends available.

Most storage boards come with pre-drilled holes and mounting screws for easy installation.
Hanging Hole Style

Size of Storage Board: 4-1/4″ x 10-1/4″ (or 5-1/4″ x 10-1/4″ with nameplate), Size of Markers: 11-1/32″ high.
- This set is designed for those who prefer to hold markers with adhesive tape.
- Legends can be placed closer together using this style.
- This set comes with a high quality Maple/Formica™ L-hook storage board. An optional nameplate is also available.

Suction Cup Style

Size of Storage Board: 4″ x 10″. Size of Markers: 11-1/32″ high with 3/4″ diameter suction cups.
- Replaceable suction cups eliminate sticky tape or hard-to-clean Velcro™.
- Markers adhere firmly to the compression paddle, yet can be easily removed.
- Available with a smooth acrylic storage board.
- Replacement suction cups, individual markers, and technologist initial markers are available.

Formica is a registered trademark of Bollock Industries, Inc. Velcro is a registered trademark of Velcro USA, Inc.
Mark-Well Markers
- ACR specified legends.
- Available with hanging holes or replaceable suction cups.
- Solid lead letters are enclosed in red or blue acrylic plastic and are colored white for greater visibility.
- These markers are an ideal choice when you require only a few legends, or want the convenience of preconfigured legends.
- Available with plastic (standard) or aluminum backing.**





NOTE: M (Magnification) can be added as a prefix or RL or RM as a suffix to these markers. For example, RMmlo or Lccrl. Please order as an “other unlisted legend”.
Mark-Well Markers

**Add “-A” to the end of catalog number for aluminum-backed markers.

Abbreviated Conventional Mammography Markers
- ACR specified legends.
- Tough, red and green polycarbonate.
- Large 3/4″ high solid lead R & L.
- Radiopaque 3/16″ high lettering for views.
- Also available with aluminum backing at additional cost (add “-A”to end of catalog number).*


Abbreviated Space Saver
- Can be used when space is limited.
- Economical.

